| Raw Material: | Synthetic Rubber |
|---|---|
| Material: | Polyurethane Rubber |
| Appearance: | Granules |
| Form: | Powdered Rubber |
| Shape: | Particle |
| Model No.: | LDPE |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
PVC particles have good electrical insulation performance, can be used as low frequency insulation material. Easy molding, not easy to crisp, tasteless, moderate hardness, surface luster, low temperature resistance, impact resistance, strong toughness, good brightness. Widely used in: wire and cable, rubber shoes, set, fender, sealing ring plug, soft floor, bag wheel, screwdriver handle, conveyor rain shoes, cable, raincoat, tube, gas pipeline, blowing film, floor leather, foam sole, sealing strip, etc.
|
product name |
Injection PVC Wire and Cable Material Data Line Extruded PVC Plastic Particles |
|||
|
grade |
Injection Molding |
|||
|
color |
red, yellow etc |
|||
|
sample |
avalible |
|||
This kind of material is made of halogen-free non-toxic EPDM resin as the main raw material, adding various additives, mixing, extrusion and granulation. This kind of material has the characteristics of good extrusion performance, excellent physical and mechanical properties, high temperature resistance and so on. It has the best cost performance.
| Application | For EV charging |
| Hardness | ≤85 A |
| Density | ≤1.450 g/cm3 |
| Tensile strength(post-irradiation) | ≥11.5Mpa |
| Elongation at break(post-irradiation) | ≥200% |
| Thermal extension(200ºC×15min×0.2MPa) | Under load ≤45%, Permanent deformation 0-10% |
| Tensile strength retention | 158ºC×168h,88% |
| Elongation retention | 158ºC×168h,89% |
| Volume resistivity @20ºC | 1.8×1015 Ω.cm |
| Flexibility | 158ºC,168h,No cracks |
| Dielectric strength | 28 MV/m |
| Brittle temperature | -40ºC |
| Brittle temperature | VW-1,Single vertical combustion IEC60332-1-2 |
| Halogen-free | Cl≤900ppm,Br≤900ppm,Cl+Br≤1500ppm PH≥4.3,Conductivity≤10us/mm |
| Thermal deformation | 121ºC,1h,No cracks on the outside and inside,Maximum thickness change≤49% |
Shandong Feiheng New Materials Co., Ltd. is located in Jinan City, Shandong Province, an important industrial town in China. Our company is a dynamic modern industrial enterprise dedicated to the research and development, production, and sales of plastic particles. With advanced equipment and strong technical strength, our annual output reaches 10000 tons. The company first has a leading plastic particle production line in China, producing products with good quality, stable performance, and a complete range of products. There are both conventional products that meet national and industry standards, as well as special varieties that meet customer requirements, which can guide the correct usage methods on site. The product has been sold to all regions of China and obtained in many countries and regions around the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}