Feature: | Photodegradable |
---|---|
Material: | Polycarbonates/PC |
Usage: | General Plastics |
Plastic Properties After Heated: | Thermoplastic Plastics |
Plastic Forming Method: | Reaction Injection Plastic |
Color: | White |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
PC Usage:
1. PC is made into large bulb shade, protective glass, the right and left eyepiece tube of optical instruments. Also, it is used as the transparent materials in plane.
2. PC is good insulation, made into insulated connector, coil frame, tube socket, insulating sleeve, telephone housing and parts, miner's lamp battery shell. Also, it is used to make fine parts of communication equipment, such as CD-ROM, telephone, computer, video recorder, telephone switches, signal relay. The PC film is used for capacitors, insulation foreskin, recorder, color video tape. etc
3. Machinery and equipment-PC is suitable for gear, rack, worm, bearings, cams, bolts, crank, ratchet, also suitable for machinery and equipment housings, covers and frames.
4. PC can be made into cap, tube, bottle and dental equipment, drug containers and surgical instruments. Even be used as an artificial kidney, artificial lung and other artificial organs.
5. For architectural, PC can be made into Double-wall hollow bars, glass of greenhouse. For textile industry, PC is suitable for
making bobbin, textile machine bearing. For daily, PC is good material can be made into tableware, toys and models.
Hot sale products
PC Prop
High impact strength, shape stable, colourless, transparent, easy dying, electric insulation, corrosion resistance, wear resistance are good. However, poor self-lubricating, with tendency to stress cracking, high temperature easily hydrolyzed, poor compatibility with other resins. PC is suitable for making instrument small parts, insulating and transparent parts and impact-resistant parts. PC usually is made into products by injection molding, extrusion, cotining, blow molding, thermoforming, printing, adhesive, coating and machining, the most important processing method is injection molding. |
This kind of material is made of halogen-free non-toxic EPDM resin as the main raw material, adding various additives, mixing, extrusion and granulation. This kind of material has the characteristics of good extrusion performance, excellent physical and mechanical properties, high temperature resistance and so on. It has the best cost performance.
Application | For EV charging |
Hardness | ≤85 A |
Density | ≤1.450 g/cm3 |
Tensile strength(post-irradiation) | ≥11.5Mpa |
Elongation at break(post-irradiation) | ≥200% |
Thermal extension(200ºC×15min×0.2MPa) | Under load ≤45%, Permanent deformation 0-10% |
Tensile strength retention | 158ºC×168h,88% |
Elongation retention | 158ºC×168h,89% |
Volume resistivity @20ºC | 1.8×1015 Ω.cm |
Flexibility | 158ºC,168h,No cracks |
Dielectric strength | 28 MV/m |
Brittle temperature | -40ºC |
Brittle temperature | VW-1,Single vertical combustion IEC60332-1-2 |
Halogen-free | Cl≤900ppm,Br≤900ppm,Cl+Br≤1500ppm PH≥4.3,Conductivity≤10us/mm |
Thermal deformation | 121ºC,1h,No cracks on the outside and inside,Maximum thickness change≤49% |
Suppliers with verified business licenses